The drum may spin without heat during a phase where this is expected. To confirm that it is not heating during drying, first identify the programme and whether the appliance uses a heating element or a heat pump.
Check what the cycle should do
Check whether you selected ventilation, refresh, cooling or heated drying. Do not treat an observation at the end as proof that the entire process took place without heat.
The temperature you feel from a heat pump may differ from that of an appliance with a heating element. Compare it with the documentation and the result, not with the heat from another machine.
Useful observations
- Whether the programme finishes normally or displays a warning.
- Whether drying worked before with the same load and setting.
- Whether there has recently been maintenance, a change of location or a power cut.
- Whether there is unusual noise, abnormal airflow or repeated cut-outs.
Check only the maintenance areas permitted by the manual. A blocked circuit can affect regulation or activate safety devices; do not try to reset them from inside.
When component diagnosis is needed
The air and heating circuit should be checked according to its design: heat generation, fan, sensors and controls. The drum spinning confirms one part of the movement, not that the whole system is working.
A lack of heating in the wash water involves a different system. Avoid replacing the wash heating element because of a symptom that occurs only during drying.
Do not repeatedly extend the programme to compensate for a persistent lack of heat; arrange an inspection of the identified system.
View all articles in Washer-dryer not drying properly: system-based diagnosis
