Heat after drying may be expected; an abnormal rise accompanied by a smell, smoke or safety cut-outs means you should stop using the appliance. Do not check the temperature by touching areas that may be hot enough to burn you.
Normal cooling and signs of a fault
If the cycle is running without any problems, allow it to complete its cooling phase and follow the unloading instructions. Avoid interrupting it out of habit and leaving hot laundry piled up.
The LG F4X7*FPY* safety manual warns about heat dissipation if drying is interrupted. If there is smoke or you suspect a fire, do not put yourself at risk to retrieve the load: follow the guidance for burning or smoke and contact the emergency services.
What can affect the temperature
Restricted airflow due to lint, a fan that is not working properly or incorrect temperature control can change how the appliance behaves. These are possibilities to check depending on the system, not diagnoses that can be made from the heat of the casing.
With the appliance switched off, cold and isolated from the power supply, check only the filters and accessible areas specified by the manufacturer. Do not open internal ducts or insert objects towards the fan.
If there have been cut-outs or it overheats abnormally again
Ask for the drying circuit to be inspected. Do not bypass thermostats or reset limiters without addressing the cause. If the problem affects the water during washing, see water overheating.
The appliance cooling down does not confirm that airflow or temperature control is working properly again; do not run another drying cycle until the fault has been identified.
View all articles in Washer-dryer not drying properly: system-based diagnosis
