The drum may spin without heat during a phase where that is expected. To confirm that it is not heating during drying, first identify the programme and whether the appliance uses a heating element or a heat pump.
Check what the cycle should do
Check whether you selected ventilation, refresh, cooling or heated drying. Don’t treat an observation at the end as proof that the entire cycle ran cold.
The temperature you feel from a heat pump may differ from that of an appliance with a heating element. Compare it with the documentation and the result, not with the heat from another machine.
Useful observations
- Whether the programme finishes normally or displays a warning.
- Whether drying worked previously with the same load and setting.
- Whether there has been recent maintenance, a change of location or a power interruption.
- Whether there are any noises, unusual airflow or repeated stoppages.
Check only the maintenance areas permitted by the manual. A blocked circuit can affect regulation or activate safety protections; don’t try to reset them from inside the appliance.
When component diagnosis is needed
The air and heating circuit must be checked according to the appliance’s design: heat generation, fan, sensors and controls. The drum spinning confirms one part of the movement, not that the entire system is working.
The wash water not heating involves a different system. Don’t replace the wash heating element because of a symptom that occurs only during drying.
Don’t repeatedly extend the programme to compensate for persistent lack of heat; have the relevant system checked.
View all articles in Washer-dryer not drying properly: system-based diagnosis
