The drum may spin without heat during a planned phase of the cycle. To confirm that it isn’t heating during drying, first identify the programme and whether the appliance uses a heating element or a heat pump.
Check what the cycle is supposed to do
Check whether you selected air-only, refresh, cool-down or heated drying. Don’t treat an observation at the end as proof that the entire cycle ran cold.
The temperature you feel from a heat pump may differ from that of an appliance with a heating element. Compare it with the documentation and the results, not with the heat from another machine.
Useful observations
- Whether the programme finishes normally or displays a warning.
- Whether drying worked before with the same load and setting.
- Whether there has been recent maintenance, a change of location or a power interruption.
- Whether there are unusual noises, abnormal airflow or repeated shutdowns.
Only check the maintenance areas permitted by the manual. A blocked circuit can affect regulation or activate safety devices; don’t try to reset them from inside the appliance.
When component diagnostics are needed
The air and heating circuit should be checked according to the appliance’s design: heat generation, fan, sensors and controls. The drum spinning confirms that part of the mechanism is moving, not that the entire system is working.
A failure to heat the wash water involves a different circuit. Don’t replace the wash-water heating element based on a symptom that occurs only during drying.
Don’t repeatedly extend the programme to compensate for a persistent lack of heat; have the identified system inspected.
View all articles in Washer-dryer not drying properly: system-based diagnosis
