The washer-dryer spins but does not heat during drying

The drum may spin without heating during a programmed phase. To confirm that it is not heating during drying, first identify the programme and whether the appliance uses a heating element or a heat pump.

Check what the cycle is supposed to do

Check whether you selected ventilation, refresh, cooling or heated drying. Do not treat an observation at the end as proof that the entire process ran cold.

The temperature you feel from a heat pump may differ from that of an appliance with a heating element. Compare it with the documentation and the result, not with the heat from another machine.

Useful observations

  • Whether the programme finishes normally or displays a warning.
  • Whether drying worked before with the same load and setting.
  • Whether there was any recent maintenance, change of location or power interruption.
  • Whether there are any unusual noises, abnormal airflow or repeated cut-outs.

Only check the maintenance areas permitted by the manual. A blocked circuit can affect regulation or activate safety devices; do not try to reset them from inside the appliance.

When component diagnosis is needed

The air and heating circuit must be checked according to the appliance's design: heat generation, fan, sensors and controls. The drum spinning confirms only one part of the movement, not that the entire system is working.

The lack of heating of the wash water involves a different system. Do not replace the wash heating element for a symptom that occurs only during drying.

Do not repeatedly extend the programme to compensate for persistent lack of heat; have the identified system inspected.

View all articles in Washer-dryer not drying properly: diagnosis by system