Motor brushes: signs of wear and replacement

Brushes can only be the cause if the motor actually has them. An intermittent fault or the motor failing to turn warrants checking the assembly, but is not enough to indicate that the carbon brushes need replacing.

Confirm the type of motor

Check the identification details and exploded diagram for the motor and its drive. A brushless motor cannot be repaired this way, even if a retailer sells carbon brushes for other appliances from the same brand.

If all you know is that the drum is not turning, first rule out causes unrelated to the motor. Do not open the appliance and run it to look for sparks.

What to inspect

  • Wear and condition of the carbon brush contact surface.
  • Movement and retention in the brush holder, depending on its design.
  • Relevant connections and pressure components.
  • Condition of the commutator that the brushes run against.

Inspection must be carried out with the power isolated and using the specified access point. The minimum length and other rejection criteria depend on the motor in question; they cannot be determined from a photograph or a generic measurement.

When replacement is not enough

If the commutator or brush holder is damaged, fitting a new carbon brush may leave the problem unresolved or damage the replacement part. Compatibility depends on the contact shape, orientation and mounting assembly, not just the external dimensions.

Follow the motor's procedure for disassembly and subsequent testing. If there is an unusual smell or smoke, stop using it and arrange an inspection; do not keep it running to bed in the new parts.

Ask for the inspection to include the commutator and housing; a worn brush may coincide with other damage that affects the scope of the repair.

View all articles in Washing machine component diagnosis and repair