The washing machine drum does not spin during the wash

A horizontal drum that stops during a wash may be waiting for a cycle condition or have a mechanical or drive problem. Confirm that it should be tumbling before looking for a part.

Check when it stopped moving

Note whether it filled, whether the door remains locked, and whether the cycle is still progressing. Soaking, heating, or sensing may involve pauses. The duration alone is not enough to confirm a fault.

It helps to determine whether it also fails to spin or only fails to tumble slowly. A sound that seems to come from the motor does not prove that the drive is turning the drum.

Check for mechanical resistance with the machine disconnected

Only after unplugging the machine, safely draining it, and opening it normally, check the accessible drum without tools. If the manual says you can turn it by hand, do so gently and do not try to force it past a stop. Rubbing or significant resistance means you should check for a jammed drum.

If it moves normally but the cycle does not drive it, the controls, wiring, motor, and drive still need to be distinguished. In machines that have one, a broken or dislodged belt interrupts that movement; direct-drive machines require different checks.

What you cannot conclude by elimination

Not all motors use brushes. Before blaming the carbon brushes or replacing a module, the drive system diagnosis should confirm the motor type and the signals it receives.

Stop checking if you notice rubbing, an odour, or unusual resistance. Continuing the cycle could worsen damage caused by a mechanical jam.

View all articles in Tumbling, agitation, and spin problems