The washing machine drum does not turn during the wash

A stationary horizontal drum during the wash may be waiting for a cycle condition or may have a mechanical or drive problem. Check that it should be tumbling before looking for a part.

Check when it stopped moving

Note whether it filled, whether the door remains locked and whether the programme is still progressing. Soaking, heating or sensing may involve pauses. The duration alone is not enough to confirm a fault.

It is useful to distinguish whether it also fails to spin or whether only the slow movement is affected. A sound that seems to come from the motor does not prove that the drive is reaching the drum.

Mechanical resistance with the machine isolated

Only after disconnecting the machine, safely completing the drain and opening it normally, check the accessible drum without using tools. If the manual allows you to turn it by hand, do so gently without trying to force past a stop. Rubbing or marked resistance calls for checking a blocked drum.

If it moves apparently normally but the programme does not drive it, the controls, wiring, motor and transmission still need to be distinguished. On machines that have one, a broken or slipped belt interrupts this movement; a direct-drive system requires other checks.

What cannot be inferred by elimination

Not all motors use brushes. Before attributing the fault to the carbon brushes or replacing a module, the drive diagnosis must confirm the motor type and the signals it receives.

Stop checking if you notice rubbing, an odour or unusual resistance; continuing the programme may worsen damage caused by a mechanical blockage.

View all articles in Rotation, Agitation and Spin Failures