On Siemens appliances, E17/F17 indicates that the water supply time has been exceeded, while E29 indicates a water inlet problem. The checks are the same, but the codes describe different warnings.
Compare the message with the E-Nr
The manufacturer's documentation lists the two entries in its table. Copy the code exactly as shown and use the appliance manual to check the water supply requirements; a pressure or flow-rate figure from another platform is not enough.
- Check that water is available and the tap is open. Make a note of whether the problem coincides with a water outage or work on the water connection.
- Check whether the inlet hose is bent or trapped.
- Check the door lock if it is part of the model's operating sequence.
- If the manual allows you to clean the inlet filters, turn off the tap and prepare to disconnect the hose before accessing them.
Do not dismantle or bypass a hose safety system. The guide to cleaning inlet filters distinguishes accessible maintenance from an internal repair.
If water is available but the problem persists
Record whether the appliance fills slowly or does not start filling at all. Request an inspection, providing the E-Nr and the full code, without attributing the issue to a specific solenoid valve or sensor.
Correcting the water supply and clearing the message are separate steps; the warning disappearing does not measure the actual flow rate.
View all articles in Siemens washing machine error codes and warnings
