E32 alternating with End may indicate that Siemens has limited the spin because the laundry is unevenly distributed. The warning does not prove that the motor is faulty.
A warning at the end of the programme
The manufacturer’s documentation describes the spin cycle being interrupted when the system detects an imbalance. Check how the wash ended: damper laundry and a bundle of clothes provide a different context from a machine that never starts spinning.
With the cycle stopped and the door unlocked, untangle the laundry. Distribute large and small items that are suitable for the same programme. A single absorbent item can be difficult to balance. Do not add more laundry than the limit allows to compensate.
Deciding whether to run the spin cycle again
If the water has drained and you have redistributed the laundry, use a spin setting suitable for the fabric, as specified in the manual for the E-Nr. Do not select a higher spin speed to overcome the imbalance.
If it happens again with different, suitable loads, note the programme, items and vibration. Check for knocking and movement if the appliance moves or knocks, and request assistance if it happens repeatedly. Load size and distribution explains more about preparing the load.
The final dampness should be considered alongside the programme selected and the distribution of the laundry, not as isolated proof of a fault.
View all articles in Siemens washing machine error codes and warnings
