On Siemens appliances, E17/F17 indicates that the water supply time has been exceeded, while E29 indicates a water inlet problem. They share some checks, but refer to different alerts.
Compare the message with the E-Nr
The manufacturer's documentation distinguishes between the two entries in its table. Copy the code exactly as shown and use the appliance manual to check the supply requirements; a pressure or flow-rate figure from another platform isn't enough.
- Check that water is available and the tap is open. Note whether the problem coincides with a water outage or work on the supply connection.
- Check whether the inlet hose is kinked or pinched.
- Check the door latch if it's part of the model's troubleshooting steps.
- If the manual permits cleaning the connection filters, shut off the tap and prepare to disconnect the hose before accessing them.
Don't dismantle or bypass a hose protection system. The guide to cleaning inlet screens distinguishes accessible maintenance from an internal repair.
If water is available but the problem persists
Record whether the appliance fills slowly or doesn't start filling at all. Request an inspection and provide the E-Nr and the complete code, without attributing the result to a specific solenoid valve or sensor.
Correcting the water supply and clearing the message are separate steps; the message disappearing doesn't measure the actual flow rate.
View all articles in Siemens washing machine error codes and warnings
