E23 on the documented Siemens models indicates a leak or water in the base. Turn off the water supply and avoid starting any more cycles while the cause is being checked.
Record the leak from the outside
The manufacturer's documentation advises turning off the tap if a leak is suspected. Approach from a dry area; if water is around sockets or electrical connections, get help to isolate the appliance without coming into contact with it.
Observe whether the dampness starts at a hose, the drawer, the seal or beneath the casing. The stage of the cycle also matters: note whether it appears during filling, washing or draining. Do not remove panels to locate water in the base tray.
Why drying it is not enough
The floor may be dry while the source of the leak is still active or water remains inside the base. Do not tilt the washing machine to reset the protection. The guide to locating leaks from the outside helps you record the visible path of the water; it does not confirm that an internal repair has been made.
If the source is inaccessible or the warning persists, request a service visit and provide the E-Nr and photographs. Do not treat E23 as a universal instruction to replace a hose or sensor.
Containing the water protects the surrounding area; whether to run another wash depends on resolving the cause.
View all articles in Siemens washing machine error codes and warnings
