E18/F18 on Siemens appliances is associated with a blocked drain filter or hose. How you clean it depends on the access provided for in the manual for your E-Nr.
Check the outlet and residual water
The E18/F18 pair is listed in the manufacturer’s documentation. Inspect the hose without moving the appliance abruptly: a crushed bend or a blocked siphon can prevent drainage. If the appliance has been installed recently, compare the height and connection with the installation diagram.
Drain the water before cleaning
Switch off and safely unplug the appliance, allow the water to cool and prepare a container. Use the drain hose or gradually open the filter as described in the manual. Do not remove the cap completely while water is still waiting to drain.
Once empty, clean any accessible debris and refit the filter with its seat clean and closed. Check any joints you have touched to make sure that clearing the blockage has not caused a leak. See pump filter maintenance if you need to prepare for this task.
If there is no user access, or the code returns even though the drain path is clear, request assistance. Hearing the pump run does not prove that it is pumping enough water, and the error alone does not mean that it needs replacing.
Make a note of whether the water drains normally after cleaning or whether the same level remains.
View all articles in Siemens washing machine error codes and warnings
