On Siemens appliances, E17/F17 indicates that the water supply time has been exceeded, while E29 indicates a water inlet problem. They share some checks but describe different alerts.
Compare the message with the E-Nr
The manufacturer's documentation distinguishes the two entries in its table. Copy the code exactly as it appears and use the appliance manual to check the water supply requirements; a pressure or flow rate figure from another platform is not enough.
- Check that water is available and the tap is open. Note whether the problem coincides with an outage or work on the water supply.
- Check whether the inlet hose is kinked or trapped.
- Check the door latch if it is part of the process for your model.
- If the manual authorises you to clean the connection filters, turn off the tap and prepare to disconnect the hose before accessing them.
Do not dismantle or bypass a hose safety system. The guide to cleaning inlet filters distinguishes accessible maintenance from an internal repair.
If water is available but the problem continues
Record whether the appliance fills slowly or does not start filling at all. Request an inspection and provide the E-Nr and the complete code, without attributing the result to a specific solenoid valve or sensor.
Correcting the water supply and clearing the message are separate steps; the alert disappearing does not measure the actual flow rate.
View all articles in Siemens washing machine error codes and warnings
