Required pressure and flow: washing machines with a tank or irregular water supply

The washing machine needs to meet its model’s pressure and flow limits while water is entering. A tap that has pressure when it’s closed may deliver insufficient flow when opened.

Three measurements to distinguish

  • Static pressure: the water supply condition when no water is flowing for that demand.
  • Operating pressure: the pressure available while the appliance and other users are drawing water.
  • Flow rate: the amount of water that can be delivered per unit of time.

An elevated tank provides a supply condition that depends on the height difference and losses along the route. Knowing the tank’s capacity isn’t enough. A pump is assessed at its operating point, not just by its rated power.

What information to gather

Find the appliance’s limits and describe the water source, outage schedules, simultaneous water use, and changes in flow rate. If measurements or changes to the installation are needed, a professional should use the appropriate measuring point and method, without improvising tests near electrical connections.

Also check hoses and fittings and water source quality. Dirt or a deformed pipe can restrict flow, but if a new installation provides insufficient water, the solution is to address the supply—not to disable the fill detection.

Automatic and manual filling

A semi-automatic washing machine may allow manual filling if it’s designed for it. Adding water manually to an automatic washing machine that isn’t designed for this doesn’t replace the need to meet its requirements.

Knocking in pipes when water is turned on or off should be assessed as a plumbing issue; it shouldn’t be confused with drum banging. If the water supply used to work and filling has changed, continue with the water inlet diagnosis.

Ask a professional to check the water supply against the exact limits in the manual; there is no tank height or pump power that works for every machine.

View all articles in Washing machine installation: requirements and checks