Leak protection systems: safety hose, valve and sensor tray

A leak protection system protects specific points along the water route. To understand its scope, identify where it detects a problem, where it shuts off the water, and which parts are upstream or downstream of the shutoff.

Protections with different scopes

  • Shutoff based on flow or volume: it activates when the condition specified for that device is met; not every slow leak meets that condition.
  • Double-wall hose: uses an outer casing and its own detection or containment mechanism; by definition, it does not protect every connection in the building.
  • Safety solenoid valve: can shut off an inlet when instructed by the control.
  • Tray with detector: detects water that reaches the designated base and activates the programmed response.

A brand name may refer to several components. Check the model diagram rather than assuming that every product with that name protects the whole home.

What lies beyond each shutoff point

A leak upstream of a valve does not stop when a downstream point is shut off. A sensor at the base also may not detect water that flows outside the path to that base. This is why an accessible tap and compatible hoses and connections are needed.

Trays and external detectors add measures at the installation site, each with its own limitations. They do not replace appliance compatibility or fix existing leaks.

If the protection is activated

Keep the message and stop using the appliance as instructed. Do not tilt the machine to hide water in the tray or bypass sensors. A drain that runs continuously may be part of a protection system, and the cause needs to be understood.

Check which point the system detects and which point it shuts off; those two details define the actual protection.

View all articles in Laundry technologies: motors, sensors and automation