A visible leak underneath the washing machine does not directly identify the pump, tub or hose as the source. First, check whether the water is coming from the front, an external connection or a filter that was recently opened.
Relate the water to the operation
Stop the machine and shut off the water supply if it is actively leaking. Disconnect the power from a dry location; don’t kneel in the puddle or put your hand under a plugged-in machine.
| When it appeared | What to note |
|---|---|
| While filling | Whether the dispenser drawer, an inlet or the front gets wet first |
| While running | Whether it coincides with the water level, load, suds or rubbing |
| While draining | Whether an external pipe overflows or water appears near the pump access |
| After cleaning the filter | How the cap was put back and whether the drip starts around its edge |
What you can check from the outside
Without moving or tilting the machine, look for water marks running down from the door or dispenser drawer. If the source is the filter cap, follow the specific instructions for checking it after draining the machine safely.
When the source is not visible, hoses, the pump assembly and other seals should be inspected based on the leak’s path. A leak associated with the drum supports may require an assessment of the bearings and seal.
Dark liquid may mix with dirt from the floor or machine. Its colour does not confirm that the transmission is damaged.
Note when it happened and where you first saw moisture; don’t remove panels to reproduce a leak while the machine is connected to a water supply.
View all articles in Washing machine water leaks: find the source
