The washer-dryer gets too hot during drying

Some heat after drying is to be expected; an unusual increase accompanied by an odour, smoke or safety cut-outs means you should stop using the appliance. Don’t check the temperature by touching areas that may burn you.

Normal cooling and signs of a fault

If the cycle is running without issues, allow it to complete its cooling phase and follow the unloading instructions. Avoid routinely interrupting the cycle and leaving hot clothes piled up.

The LG F4X7*FPY* safety manual warns about heat dissipation if drying is interrupted. If there is smoke or you suspect a fire, don’t put yourself at risk to retrieve the load: follow the instructions for burning or smoke and contact emergency services.

What can affect the temperature

Restricted airflow due to lint, a fan that isn’t working properly or incorrect temperature regulation can affect how the appliance operates. These are possibilities to check depending on the system, not diagnoses that can be made from the heat of the casing.

With the appliance switched off, cool and isolated from the power supply, check only filters and accessible areas specified by the manufacturer. Don’t open internal ducts or insert objects towards the fan.

If there have been cut-outs or it overheats again

Arrange an inspection of the drying circuit. Don’t bypass thermostats or reset limiters without fixing the cause. If the problem affects the water during washing, see water overheating.

The appliance cooling down doesn’t confirm that airflow or temperature regulation is working properly again; avoid another drying cycle until the fault has been identified.

View all articles in Washer-dryer not drying properly: system-based diagnosis