In a twin-tub washing machine, pauses and changes of direction depend on the timer and the machine’s design. A lack of movement or a new imbalance should be compared with that sequence, not with another washing machine.
Check the load and visible condition
With the machine stopped and unplugged, check whether an item of clothing or an object is blocking the accessible area around the wash plate. Do not lever under the agitator or force it to release it. Follow the specified load and water level for washing.
If the timer control has stopped advancing or is not transmitting the selected setting, note what is happening without turning it beyond its limits.
What the inspection can indicate
Note whether it fails to work in either direction, whether its strength changes, or whether it only fails after a certain time. Operation in one direction only may be related to several different components; it does not automatically mean that the capacitor has failed.
The agitator and its mounting must transmit the movement received from the shaft. If the movement is not transmitted, the belt (if fitted), motor and timer will need to be assessed in accordance with the wiring diagram.
Limits of checks you can carry out at home
Do not observe the motor with a panel removed while the machine is connected to the mains, or swap wires to reverse the direction. A competent person with the appropriate documentation should compare the contacts and operation.
Describe whether the fault affects the direction, starting or strength of movement; these are different details, even if the clothes are not washed.
View all articles in Faults with semi-automatic and twin-tub washing machines
