Stuck internal flaps in a top-loading washing machine

In a top-loading washing machine with a horizontal drum, open or stuck internal flaps can prevent the drum from turning. Stop using the machine and don’t try to reposition the flaps by forcing the drum to turn.

Confirm that this is the right design

This issue affects horizontal drums with opening flaps inside an outer lid. A top-loader with a vertical agitator doesn’t use the same assembly. If only the outer lid won’t open, see lid lock.

Signs that mean you should stop using the machine

A bang followed by the drum becoming stuck, an opening that is no longer aligned, or a suspicion that the flaps opened while the drum was turning all warrant an inspection. Don’t try another cycle to get the drum back into position.

Safely disconnect the power. Don’t insert screwdrivers, rods or wires through the perforations: you could damage the flaps, latches, tub or heater and make the jam worse.

What the service technician should assess

They should locate the drum’s position, check the flaps and their latching mechanism, and rule out damage to nearby surfaces. How the drum can be freed depends on access to that model and may require disassembly.

Tell them whether the flaps were closed before the wash, when you heard the bang, and whether you can feel resistance. You don’t need to recreate the mechanical jam to provide this information.

Freeing the drum isn’t enough if the internal latch has been damaged: the flaps also need to be checked to make sure they latch securely again.

View all articles in Washer door, lid and safety lock problems