First distinguish between a door that won’t fit properly and one that closes but isn’t detected by the controls. A mechanical click does not confirm that the electrical safety interlock is working.
If it won’t fit properly
With the machine stopped and isolated from the power supply, remove any clothing caught in the closing area. Check the latch, handle, hinge and catch without inserting any tools. A sagging door or broken part needs mechanical repair; don’t force it shut.
If the hinge or handle has visible play, don’t adjust the catch to hide it. Nor should you hold a lid down with a weight or tape.
If it fits properly but the programme won’t start
Check which indicator is displayed and at what stage the model locks. Some lids don’t lock immediately when the appliance is switched on. Check the start command and the programme start conditions in the manual.
If the door-closure warning persists with the door correctly aligned, the diagnosis should distinguish between the latch, wiring, safety interlock and controls. An intermittent contact cannot be identified from the sound of the mechanism alone.
What not to use as a test
Don’t bridge terminals, bring magnets close to fool sensors, or hold the catch manually during a cycle. Functional testing must be carried out with the appliance assembled and its protective devices restored, using the specified procedure.
Tell the service engineer whether it “won’t fit properly” or “fits but shows the door as open”; avoid replacing the lock before checking the alignment.
View all articles in Washing machine door, lid and safety lock problems
