If holes or tears appear, compare their shape, location and recurrence. Do not test again with garments if a sharp surface is visible or damage recurs without an identified cause.
Distinguishing tears, snags and weakened fabric
Check for pulled threads, abrasion, cuts or a weakened area that has opened. Compare with previous wear on elbows, the crotch, seams or contact points. Damage noticed when taking clothes out may have started before washing.
Products can also affect the fabric. If there is colour loss alongside the damage, see discolouration and chemical exposure, without assuming every tear comes from the drum.
Checks you can do
- Check the pockets and fasteners on the load, including Velcro, hooks and detached parts.
- Check the care label, load size, cycle and products used.
- With the machine stopped and without accessing moving mechanisms, visually inspect accessible surfaces.
- If you see a sharp object or damaged part, stop using the machine and consult a technician for diagnosis.
Do not run your hand along a suspect edge, insert tools into gaps or dismantle the drum. A visual inspection alone does not justify replacing parts based on a single hole.
Preparing future loads
Adjust the preparation of fasteners and garments when you identify that as the cause. Use protective bags only for items that are already suitable for them; do not use them to keep washing with a damaged surface. If tears recur, record the affected garments and cycles for the technician.
If there is a sharp edge or repeated damage, stop using clothes to test the machine and keep the information for diagnosis.
View all articles in Laundry not coming out right: residue, stains and washing damage
