A missing jet only indicates a possible recirculation fault if the model has that circuit and is meant to activate it during that stage. Visible water may also come directly from the inlet.
Identify where the water should come from
Recirculation returns water from the tub to the wash circuit. It is different from adding fresh water or sending water to the drain. The explanation of the recirculation circuit helps locate these functions.
Not all washing machines use a second pump or maintain a continuous jet. Check the manual to see which cycles and conditions use it before interpreting its absence.
Follow the documented route
- Confirm the cycle, stage and conditions required to activate the function.
- Check only the accessible cleaning points approved for user maintenance.
- Investigate blockages or damage to the ducts in the circuit.
- Check the pump, connections and control sequence using the technical procedure.
The operation of the drain pump does not show that the circulation pump is working properly. Nor does noise confirm that water is following the expected path.
When replacement is appropriate
Internal repairs require safe isolation, water containment, and precise identification of the pump and connections. Seals, clamps and routing must be restored, and watertightness and circulation tested with the machine assembled.
Compatibility is not determined by appearance: a drain pump and a circulation pump are not interchangeable without documented equivalence.
Tell us which cycle was running and which outlet you expected to see water from; that observation helps check first whether a recirculation command was being issued.
View all articles in Washing machine component diagnosis and repair
