F9 E1 indicates an excessively long drain time on front-load Whirlpool washers; drn indicates an incorrect drain on HE top-loaders. Both require the drainage system to be checked, but don’t mix up codes between control panels.
Check the drainage path
The manufacturer’s documentation links F9 E1 to the drain time. The permitted height and access to the filter depend on the model manual: not all Whirlpool washers have a front-access filter that users can open.
- If water is retained, visually check for kinks in the hose and whether water is backing up from the household drain.
- After installation, check the height, support and outlet connection against the appliance diagram.
- If there’s a lot of suds, note the detergent and amount used; suds can also make draining take longer.
Before removing a filter
Stop the programme, safely disconnect the appliance and let the water cool. Use the user drain procedure in the manual, with a container ready and a way to stop the flow. Don’t unscrew a plug completely while the drum is full. Once it’s empty, clean only the parts you can access and refit the plug so it seals tightly; see how to prepare for and clean the filter.
If the hose and accessible filter are clear but water is still retained, avoid running further cycles and arrange for assistance. Hearing the pump does not prove that it’s draining correctly or confirm that it needs replacing.
Tell the technician whether the message appears every time the washer drains or only with particular loads and products.
View all articles in Whirlpool washing machine error codes and alerts
