Siemens E18 or F18 error: drainage blocked

E18/F18 on Siemens appliances is associated with a blocked drain filter or hose. Cleaning depends on the access method specified in the manual for your E-Nr.

Check the drain outlet and wastewater

The E18/F18 code is listed in the manufacturer’s documentation. Check the hose without moving the appliance abruptly: a kink or a blocked trap can prevent drainage. If the appliance has been recently installed, check the height and connection against the installation diagram.

Drain before cleaning

Switch off the appliance and disconnect it safely. Let the water cool and have a container ready. Use the drain hose or gradually open the filter as described in the manual. Don’t remove the plug completely while water is still waiting to drain.

Once the appliance is empty, clean any accessible debris and refit the filter, ensuring its seat is clean and securely closed. Check any connections you have touched to make sure clearing the blockage hasn’t caused a leak. See how to maintain the pump filter if you need help preparing for this task.

If there is no user access, or the code returns when the drain path is clear, arrange for service. Hearing the pump run does not prove that it is moving enough water, and the error alone does not mean the pump needs replacing.

Note whether the water drains normally after cleaning or remains at the same level.

View all articles in Siemens washing machine error codes and warnings