E32 alternating with End may indicate that Siemens has limited the spin cycle because the laundry is unevenly distributed. The warning does not prove that the motor is faulty.
A warning at the end of the programme
The manufacturer’s documentation describes the spin cycle being interrupted when the system detects an unbalanced load. Check how the wash finished: wetter laundry and a bundle of clothes point to a different situation from a machine that never starts spinning.
With the cycle stopped and the door unlocked, untangle the laundry. Distribute large and small items that are suitable for the same programme; a single absorbent item can be difficult to balance. Don’t add more laundry than the limit to compensate.
Deciding whether to spin again
If the water has drained and you’ve redistributed the laundry, use a spin cycle suitable for the fabric, as specified in the manual for your E-Nr. Don’t select a higher spin speed to overcome the imbalance.
If it happens again with different, suitable loads, note the programme, laundry and vibration. Check for knocks and movement if the appliance moves or knocks, and seek assistance if it happens repeatedly. Load size and distribution provides further guidance on preparing the load.
Final dampness should be considered alongside the selected programme and how the laundry was distributed, not as proof of a fault on its own.
View all articles in Siemens washing machine error codes and warnings
