HC code on a Maytag washing machine: reversed water connections

On documented Maytag HE top-loaders, HC indicates that the hot and cold water supplies are connected to the wrong inlets.

Identify both connections

This meaning comes from the manufacturer’s documentation for models with two inlets. Check the labels on the appliance and follow the hoses to each tap. Colour or left and right positions are not a substitute for identifying them.

If you confirm the connections are reversed, stop the machine and turn off the water supply before disconnecting anything. Correct only the connections that the manual allows users to adjust and that you can reach without moving the appliance or straining the power cord. Have a container ready for any remaining water, and keep the seals in place.

After repositioning the hoses

Turn on the taps and check the connections before running the recommended test wash. If you see any drips, do not continue: correct the installation or ask for help. If an inlet is not supplying water, this is a different check from swapping the inlets; see hot or cold water problems.

If HC persists despite the connections being correct, contact a service technician. Do not apply this interpretation to a single-inlet Maytag or another platform without checking its manual.

A photo showing the routing of both hoses can help the installer check that the correction has been made properly.

View all articles in Maytag washer error codes and alerts