HC Warning on a Maytag Washer: Water Connections Reversed

On documented Maytag HE top-load washers, HC warns that the hot and cold water are connected to the opposite inlets.

Identify both connections

This meaning comes from the manufacturer's documentation for dual-inlet machines. Check the labels on the appliance and follow the hoses to each tap. Colour or left-to-right position is not a substitute for identifying them.

If you confirm that the connections are reversed, stop the machine and shut off the water supply before disconnecting anything. Correct only the connections that the manual says users may adjust and that you can reach without moving the appliance or straining the cord. Have a container ready for residual water, and keep the seals in place.

After repositioning the hoses

Turn on the taps and check the connections before running the specified verification wash. If you see any drips, don't continue: correct the installation or ask for help. If a tap isn't supplying water, that's a different issue from swapping the inlets; see hot or cold water problems.

If HC persists when the connections are correct, get assistance. Don't apply this interpretation to a single-inlet Maytag washer or another platform without confirming it in that model's manual.

A photo showing how the two hoses are routed can help the installer check that the correction was made properly.

View all articles in Maytag Washer Error Codes and Alerts