dET indicates that a cartridge has not been detected in compatible Maytag machines; F8 E2 points to the dispenser system. Identify the message before cleaning or changing the settings.
Cartridge missing or incorrectly fitted
For dET, the manufacturer's documentation advises checking that the cartridge is inserted correctly and that the drawer is closed. First check whether you plan to use automatic dispensing or the supported manual alternative. A cartridge message does not mean you have to install one when the model can operate with a single dose.
The system displays F8 E2
Check for detergent build-up on the drawer parts that the manual says can be removed. With the cycle stopped, clean these parts and refit them correctly. Do not put objects into internal channels or dilute the product with mixtures not approved by the manufacturer.
If the product is still not being used after cleaning, note which reservoir is affected and which programme you used. The dispenser not dispensing troubleshooting guide distinguishes between no product being used and the wrong amount being dispensed.
A clean drawer does not confirm that the internal system is working, just as a recognised cartridge does not prove that it is dispensing. If the alert returns, contact service and provide these two details separately. Do not compensate for the suspected fault by adding a second dose without checking the active mode.
Keep the name of the dispenser system and the complete message to avoid following instructions for a different design.
