dET indicates that a cartridge wasn’t detected on compatible Maytag models; F8 E2 points to the dispenser system. Identify the message before cleaning or changing the settings.
Cartridge missing or improperly seated
For dET, the manufacturer’s documentation recommends checking that the cartridge is inserted properly and the drawer is closed. First, check whether you’ll use automatic dispensing or the supported manual option. A cartridge message doesn’t mean you have to install one if your model supports using a single dose.
The system displays F8 E2
Check for detergent buildup on the drawer parts that the manual says can be removed. With the cycle stopped, clean those parts and reinstall them correctly. Don’t put objects into internal channels or dilute the product with mixtures the manufacturer doesn’t approve.
If the product still isn’t being dispensed after cleaning, note which reservoir is affected and which cycle you used. The dispenser not dispensing troubleshooting steps distinguish between product not being used and the wrong amount being dispensed.
A clean drawer doesn’t confirm that the internal system is working, just as a recognized cartridge doesn’t prove that it’s dispensing. If the message returns, contact service and provide those two details separately. Don’t compensate for a suspected problem by adding a second dose without checking the active mode.
Keep the dispenser system name and the complete message handy to avoid following instructions for a different design.
