Error E10, E11 or C1 in Electrolux washing machines: water supply

E10, E11 and C1 on compatible Electrolux models indicate problems with the water circuit. On some control panels, the same error family is signalled by a beep or flashing light.

Describe how the filling is failing

The manufacturer's documentation covers no water entering, insufficient filling and problems related to the water flow path. Check the household water supply and the washing machine tap before trying to restart it.

If it starts taking in water, check whether it continues to enter slowly or drains away at the same time. An incorrectly installed drain hose can cause siphoning; check its height and connection against the manual for your PNC.

Check what you can access

Check the hoses for kinks. Clean the mesh filters only if the manual authorises access to them: turn off the water, prepare for disconnection, then reinstall the filter and seal afterwards. Check that the connection does not leak. The inlet mesh filter guide explains this process in more detail.

If there is foam, check the dose and detergent as an additional factor, not as an automatic explanation for every E10 error. If the external water flow path is correct and the warning returns, request service and provide the full code. Do not assume the valve is faulty just because there is no water in the drum.

Have the PNC handy when you enquire: the measurements and controls of another Electrolux model may not apply.

View all articles in Electrolux washing machine error codes and warnings