EH0/EHO on Electrolux washing machines refers to the power supply. The error family distinguishes EH1 for out-of-range frequency, EH2 for high voltage and EH3 for low voltage.
Separate a power supply issue from an appliance fault
The manufacturer's documentation confirms those subcodes, but the control panel is no substitute for a professional electrical check. Note whether other appliances also experienced interruptions, or whether the fault began after the connection was changed.
Visually check for a direct connection, without an extension lead or makeshift adaptors. Do not open the power point or test another appliance if there is heat, an odour, damage or moisture. If protective devices trip, stop trying to restart it and arrange an inspection.
Reset only if there are no signs of damage
Support recommends disconnecting the machine for 30 to 60 seconds, then selecting a programme again when the connection is dry, accessible and safe. Check the manual for the PNC; if the error returns, do not keep disconnecting it repeatedly.
An issue shared with the electrical installation should be handled by an electrician. If the power supply has been checked and only the washing machine is faulty, arrange appliance service. The guide to washing machine power points and protective devices explains what the installation should be checked for, without assuming a universal voltage.
Report the error suffix: frequency and voltage do not describe the same condition.
View all articles in Electrolux washing machine error codes and warnings
