Error E10, E11 or C1 in Electrolux washing machines: water supply

E10, E11 and C1 on compatible Electrolux models indicate problems with the water circuit. On some control panels, the same error family is signalled by a beep or flashing light.

Describe how the machine is failing to fill

The manufacturer's documentation covers no water entering, insufficient filling and problems related to the water flow path. Check the household water supply and the washing machine's tap before trying to reset it.

If the machine starts taking in water, check whether it continues to enter slowly or drains away at the same time. An incorrectly installed outlet can cause siphoning; compare its height and connection with the PNC-specific manual.

Check what you can access

Look for kinks in the hoses. Clean the mesh filters only if the manual permits access: turn off the water, prepare to disconnect the hose, and refit the filter and seal afterwards. Check that the connection does not leak. The inlet mesh filter guide explains this procedure in more detail.

If there is foam, check the detergent dose and product as an additional factor, not as an automatic explanation for every E10 error. If the external water flow path is clear and the warning returns, contact a service technician and provide the full code. Do not assume the valve is faulty just because there is no water in the drum.

Keep the PNC handy when making an enquiry: the measurements and controls of another Electrolux model may not match.

View all articles in Electrolux washing machine error codes and alerts