Error E20, E21 or C2 on Electrolux washing machines: not draining

E20/E21/C2 on Electrolux machines, or two beeps or flashes on compatible models, indicates a drainage problem. Keep a record of any additional subcode.

Installation, blockage or suds

The manufacturer’s documentation also lists E22, E23 and E24. Don’t automatically interpret these as different components that need replacing. Note whether water remains and whether the appliance attempts to pump it out.

Check for a kinked hose, insertion depth and height as specified in the manual. If the hose connects to a trap, check whether the household drain also backs up. If there is excessive suds, note the detergent dosage and products used, as these can make draining more difficult.

Before opening the maintenance access panel

Check that your PNC has a user-accessible filter. Stop and safely disconnect the appliance, let the water cool and follow its gradual draining procedure. Remove the filter only once the controlled draining has finished; clean it and refit it so it is watertight.

See cleaning the pump filter to help you prepare. If there is no authorised access point or draining continues to fail, arrange for assistance. Don’t try another wash with water still inside or force the door open to retrieve clothes.

Hearing the pump make a noise does not confirm that the drain path is clear or that the flow rate is sufficient.

View all articles in Electrolux washing machine error codes and warnings