E40/E41 on Electrolux machines indicates that the door or lid is not properly closed or recognised. Four beeps or flashes may signal this condition on compatible control panels.
Check the part that needs to close
The manufacturer’s documentation covers compatible front loaders, top loaders and washer-dryers. Use the manual for your PNC to identify the latch; don’t look for a front loader’s latch in a top loader’s design.
Stop the machine and open it when permitted. Remove any items caught in the seal or around the opening; reduce the load if it is pushing outwards. Check for any visible obstruction and close the door or lid again without slamming it.
When the control panel still indicates that the door is open
A door that appears to be mechanically closed is not necessarily recognised as such. If your model has a mechanical child safety lock, check its specific operation before moving it: not all models have one, and it is not the same as the control lock.
Only retry as instructed in your manual after correcting the fit. If the warning returns when nothing is obstructing the door or lid, request assistance. If the door or lid won’t release, use the door and lid safety procedure before looking for an emergency release.
Note whether the fault occurs when starting or after the wash has begun; these are different observations for the service team.
View all articles in Electrolux washing machine error codes and warnings
