Error E10, E11 or C1 on Electrolux washing machines: water supply

On compatible Electrolux models, E10, E11 and C1 indicate problems with the water system. On some control panels, this family of errors is signalled by a beep or flashing light.

Describe how filling fails

The manufacturer's documentation lists no water entering, insufficient filling, and problems related to the water path. Check the household water supply and the washing machine's tap before trying to reset it.

If it starts taking in water, check whether it continues to fill slowly or drains at the same time. An incorrectly installed drain hose can cause siphoning; compare its height and connection with the manual for your PNC.

Check accessible parts

Check the hoses for kinks. Only clean the screens if the manual permits access: turn off the water, prepare for disconnection, and reinstall the filter and seal afterwards. Check that the connection does not leak. The inlet screen guide provides more details about this procedure.

If there are suds, check the detergent amount and product as an additional factor, not as an automatic explanation for every E10. If the external water path is clear and the warning returns, request service and provide the full code. Do not conclude that the valve is faulty just because there is no water in the drum.

Have the PNC handy when you contact support: the measurements and controls for another Electrolux model may not apply.

View all articles in Electrolux washer error codes and alerts