On the ASKO WM76S, E2 and E22/E22.1 are related to the door not completing the locking process. The manual distinguishes between an open door, a door that appears closed and a mechanism that needs to reset.
E2 with the door open or apparently closed
The manufacturer's documentation explains that a door that is not fully closed may spring back while attempting to lock. With the machine stopped, move any clothes away from the catch and check that the door closes normally without forcing it.
In certain E2 cases on the WM76S, the mechanism needs about ten seconds to return to its position, and the panel may not respond while it does so. If the door appears closed, the manual says to switch the machine off using the control, switch it back on and wait for the reset. This timing is not a rule for every ASKO machine.
E22 or E22.1
These alerts indicate that a closed door cannot be locked. After checking that the catch is clear, follow the manual's user reset procedure. If the error returns, request a service call.
If the mechanism prevents the door from closing or you need to perform an emergency procedure, check the exact conditions; don't insert tools based on a generic instruction. If the issue is releasing a door that is already locked, use the door and safety procedure and the relevant unlocking notice.
Note whether the door springs back, stays closed or will not close; these are different situations, even if they all involve E2.
View all articles in ASKO washing machine error codes and warnings
