ASKO E23 and E24 errors: the door won’t unlock

E23/E23.1 and E24 on the ASKO WM76S indicate unlocking problems. Before retrieving the laundry, check that the cycle has ended, the water has drained and the drum has stopped.

Door still locked after the programme

The manufacturer’s documentation distinguishes these warnings from initial locking faults. Note the decimal suffix and check whether a function that keeps the laundry in water is still active, or whether a phase is yet to finish. A normal safety delay is not, by itself, an error.

Resetting and opening this model

The manual recommends switching the machine off and back on for a release fault. If it happens again, contact support. To retrieve laundry manually, follow the WM76S emergency door-opening section, ensuring the machine is disconnected, the water has been drained and conditions are safe.

Don’t insert a screwdriver beside the lock based on experience with another appliance. If you can’t check the water level, temperature or exact opening point, stop the procedure. Door, lid and safety lock explains the requirements to check first.

If the door opens but the warning returns in another cycle, arrange a diagnosis. Retrieving the laundry doesn’t prove that the unlocking system has been repaired.

Report whether the fault appeared at the end of a cycle, after cancelling, or following a power cut.

View all articles in ASKO washing machine error codes and warnings