A visible jet may come from the water supply or from water already in the drum. Recirculation and premixing serve different purposes and can both be present in the same appliance.
How the water flows
| System | Conceptual route | Purpose |
|---|---|---|
| Recirculation | Drum, pump, pipe and return to the load | Redistribute some of the wash water |
| Inlet spray | Water supply, valve and outlet towards the clothes | Supply fresh water to a particular area or at a particular stage |
| Premixing | Water and detergent pass through a preparation area | Distribute the mixture before it reaches the clothes |
Some premixing systems incorporate air; check the technical description to confirm whether this is the case. Visible foam does not indicate how much dirt has been removed or prove a consistent benefit.
What a jet does not prove
If it does not appear during a particular stage, that does not necessarily mean there is a fault: it may be disabled by the programme, water level or sequence. Nor does it mean that the appliance does not fill with water. To locate it, consult the documented water flow path and distinguish between the inlet, recirculation and drainage paths.
Automatic dosing determines how much detergent its mechanism dispenses. Premixing describes what happens afterwards or which circuit is used to prepare the mixture; the two terms are not interchangeable.
Results and maintenance
Claims of more even distribution or reduced time need to be assessed against the test conditions for the specific feature. Pipes and nozzles may require specific maintenance; do not dismantle them based on experience with another brand.
If expected recirculation is consistently absent, the guide to the recirculation pump and circuit helps distinguish between the appliance's configuration, a blockage and a fault.
Identify where the water comes from and where it goes before interpreting the purpose of a jet or attributing a washing result to it.
View all articles in Washing technologies: motors, sensors and automation
