Error EH0 or EHO on Electrolux washing machines: power supply

EH0/EHO on Electrolux appliances refers to the power supply. The error family distinguishes EH1 for out-of-range frequency, EH2 for high voltage and EH3 for low voltage.

Separate supply issues from appliance faults

The manufacturer’s documentation confirms these subcodes, but the display is no substitute for a professional electrical check. Note whether other appliances also experienced interruptions or whether the fault began after the connection was changed.

Visually check for a direct connection, without an extension lead or makeshift adapters. Do not open the socket or test another appliance if there is heat, an odour, damage or moisture. If the circuit protection trips, stop trying and arrange an inspection.

Reset only if there are no signs of damage

Support advises disconnecting the appliance for 30 to 60 seconds and selecting a programme again, provided the connection is dry, accessible and safe. Check the manual for your PNC; if the error returns, do not keep disconnecting the appliance repeatedly.

A problem affecting the installation as a whole should be handled by an electrician. If the power supply has been checked and only the washing machine is affected, request appliance service. The guide to washing machine sockets and circuit protection explains what the installation should be checked for, without assuming a universal voltage.

Mention the error suffix: frequency and voltage do not describe the same condition.

View all articles in Electrolux washing machine error codes and alerts