Error E40 or E41 on Electrolux washing machines: door or lid not closed

E40/E41 on Electrolux indicates that the door or lid is not properly closed or recognised. Four beeps or flashes may communicate this condition on a compatible control panel.

Check which part needs to close

The manufacturer documentation covers compatible front-loaders, top-loaders and washer-dryers. Use the manual for your PNC to identify the latch; do not look for a front-loader’s latch in the design of a top-loader.

Stop the machine and open it when permitted. Remove any garments caught in the seal or the latch area; reduce the load if it is pressing outwards. Check for any visible obstruction and close the door again without slamming it.

When the control panel still indicates that the door is open

An apparently closed mechanical latch does not guarantee that the door is recognised as closed. If your model has a mechanical child lock, check its specific operating instructions before moving it: not all models have one, and it is not the same as the control lock.

Only try again as directed in your manual after correcting the fit. If the warning returns when the path is clear, request assistance. If the door does not release, use the door and lid safety procedure before looking for an emergency release.

Note whether the fault occurs when starting or after the wash has begun; these are different observations for the service team.

View all articles in Electrolux washing machine error codes and alerts