EF0/EFO on Electrolux machines may be associated with a leak, excessive foam or an unbalanced load. EF3 is identified as leak detection in the support information consulted.
Give priority to a water leak
The manufacturer's documentation does not attribute all these codes solely to detergent. If you see water leaking, stop using the machine and turn off the water supply. Avoid handling the plug if there is moisture or water around it.
Check the drawer, filter connection, hoses and door seal from the outside. A trapped garment may prevent the seal from sitting correctly, but checking this does not rule out other leaks. Do not tilt the washing machine to empty an internal tray.
If there is no visible leak
If there is a lot of foam, check the dose and any products added, and follow the recovery time given in the manual. Clean the drawer only through the user-accessible opening if there is a build-up. If there is no foam but the clothes are bunched up, wait for the door to unlock normally and redistribute the load within the programme's capacity.
Note the condition you found. If the warning returns or you cannot locate the leak, request a diagnosis with the PNC and the complete code. If the issue is limited to foam, see how to correct excessive foam.
Do not run another cycle to check whether EF3 clears while water is still appearing.
View all articles in Electrolux washing machine error codes and alerts
