Descale the washing machine without damaging its components

Descale when the water conditions, deposits and model instructions warrant this treatment. Use a compatible product and follow its complete procedure; do not treat every white residue as limescale.

Before choosing a descaler

Gather information about the water hardness, the maintenance history and what you can see. A greasy film or detergent residue may require a different type of cleaning. Bosch distinguishes between a descaler for mineral deposits and a cleaner for greasy residues and advises following the instructions on each product.

If you are enquiring because the machine does not heat up or is faulty, do not use descaling to diagnose a problem with the heating element. Its surface cannot be fully inspected through the drum.

Preparation and application

  1. Check that the appliance is compatible with the product for its type of machine and materials. Check the restrictions in the manual and on the label.
  2. Empty the washing machine and remove any visible residue that is not part of the scale. Make sure there is no other product left in the system.
  3. Apply the specified amount in the designated place. Do not assume that the descaler goes in the detergent drawer.
  4. Run the approved programme and let all its stages finish.
  5. Run any rinses required by the treatment before washing clothes again.

Do not mix descaler with chlorine or try to make it more powerful using household acids. If another substance has been used or you are unsure whether any residue remains, check product safety before starting.

Check the result without opening the machine

Inspect the accessible surfaces and check whether any residue needs to be removed. Do not assume from its appearance that the entire heating element is free of deposits. If the build-up persists, check whether the manufacturer allows another application; do not increase the concentration or temperature.

If the deposits return, review water prevention and treatment. Corrective descaling frequency should depend on the appliance and water supply conditions; do not treat one brand's recommended interval as a general rule.

Completing a descaling treatment completes the approved process; it does not certify the internal condition of every component or guarantee that a particular level of performance will be restored.

View all articles in Limescale and water quality: caring for your washing machine