Complete cleaning of a front-loading washing machine

For a front-loader, first remove debris from the opening and accessible parts, refit them, then run the approved empty cleaning cycle. The seal and detergent drawer need to be checked separately.

Prepare the machine and access

Empty the drum and check the maintenance sequence for your model. Before doing any manual work, stop the machine, disconnect it from the power supply and let it cool sufficiently. Have cloths and a container ready if you are going to deal with the drain. Do not move a built-in or stacked washing machine to reach a part unless you have a safe procedure for doing so.

The Panasonic front-loader guide covers the drawer, tub, seal and filter separately: these are points to check, not one and the same chemical wash.

Cleaning sequence

  1. Opening: check the glass and the folds of the seal. Remove any visible lint or objects and follow the rubber seal cleaning procedure without pulling on it.
  2. Detergent drawer: check the compartments and housing. If it needs cleaning, follow the manual drawer-cleaning procedure using the approved parts.
  3. Drain: attend to the pump filter only if your manual says it can be accessed at home. Do not open the cap if water is trapped or hot without first completing the specified draining procedure.
  4. Washing area: remove visible deposits from the drum. Do not put tools through its perforations.
  5. Empty cycle: refit all parts and run the cleaning programme with or without a cleaning product, as appropriate for the machine.

Check the result

Once the cycle has finished and the door has unlocked, look for fresh debris around the edge and in the folds. Remove it using an approved method; repeat the cycle or add a rinse only if the instructions allow it. Check that any joints you handled remain dry during the test.

If a stain will not come off, do not scrape the seal. If you find cracks, leaks or persistent build-up in an area you cannot reach, arrange for that area to be inspected.

Finish the sequence with all parts correctly refitted and no treatment residue left behind. Leaving the door open to air afterwards helps maintain the result.

View all articles in How to clean your washing machine by type