Cleaning automatic dosing tanks and circuits

Cleaning an automatic tank outside the washing machine and flushing its lines are different tasks. The manual should state which container can be removed, which areas can get wet and whether there is a maintenance programme.

Before emptying the system

Identify the system name, the compartments and the product each one contains. Check whether cleaning is needed when changing product formulation, after a period of inactivity or when a maintenance instruction appears. Do not top up a tank with a mixture of products just to avoid emptying it.

For the range described by Whirlpool for its Load & Go dispenser, cleaning is specified when changing the contents and before a prolonged period of inactivity. These conditions apply to that system; they do not authorise putting water into any automatic tank.

Removable tank: follow the documented access procedure

  1. Switch off dosing and prepare the machine for removing the container as instructed in the manual.
  2. Collect any remaining product and dispose of it in accordance with the label. Do not mix it with waste from other cleaning products.
  3. Open only covers and parts intended for the user. Keep water away from contacts, sensors and connectors.
  4. Clean and rinse only the permitted areas. If thickened detergent cannot be removed this way, do not add solvents or use objects to pierce the lines.
  5. Leave the surfaces to dry as required and refit the container. Make sure it is seated correctly before refilling.

Internal tubes may need a different procedure

A clean tank does not prove that its suction lines are clean. If there is a scheduled flushing function, use the approved medium and container. On Miele TwinDos, circuit maintenance is carried out using a dedicated function; it is not replaced by a drum cycle.

When using the machine again, check that the contents match the compartment and review the automatic dosing settings. If it does not draw in the product, loses product or the warning remains after maintenance is complete, consult the dosing fault checks without opening pumps or internal connections.

Before a prolonged absence, decide whether to empty or maintain the circuit using the available manual; do not wait for the detergent to dry.

View all articles in Which washing machine components to clean and how to identify them