Residue that appears during a cleaning cycle may be deposits that have come loose, but its black colour does not prove that it is mould. Remove what you can see and check whether the material decreases or seems to come from a damaged part.
Look at the residue without assuming its cause from its colour
With the machine empty, switched off and cool, check what is left in the drum and around the rim. A soft sheet, a lump of soap and a stretchy fragment are not equivalent observations. You do not need to dissolve them to describe them; note their appearance, quantity and when they appeared.
If there are fragments that look like rubber, metal or plastic, check only the parts you can see. A new noise, rubbing or a leak changes what needs attention first: avoid running further cycles until you have established whether something is damaged.
What to do after a cleaning cycle releases deposits
- Remove accessible residue with a soft cloth or using the method in the manual, without pushing it through the holes.
- Check the surfaces and any filters or traps that the manufacturer says you can access, where residue may have collected.
- Complete the rinse specified for the treatment. If the manufacturer recommends repeating the cleaning, follow that specific instruction.
- Inspect the empty machine again and compare the amount of residue. Do not put laundry in to collect what remains.
The drum-cleaning programme routine determines whether to repeat the process. If the residue does not decrease, do not keep switching to stronger cleaners: request an inspection and share your observations.
Distinguish cleaning from prevention
A build-up of soap means you should check the detergent dosage once the machine is clean. For widespread damp film, see mould and biofilm. If the deposit looks mineral, use the limescale and water assessment before choosing an acid.
Cleaning the drum and tub deals with residue inside the machine. If you see marks only on clothes and no residue inside, follow the check for stains on clothes: do not assume every mark comes from dirt in the tub.
Keep a description or photograph of the residue to share with support if it persists. You do not need to dismantle the drum to document what is happening.
View all articles in Bad smell from the washing machine: identify the source and get rid of it
