Cleaning a top-loading washing machine

To clean a top-loading washing machine, first check whether it has a vertical tub with an agitator or impeller, or a horizontal drum with flaps. The top opening does not determine which parts can be removed or which cycle is suitable.

If it has an agitator or impeller plate

With the machine empty and disconnected from the power supply before any manual work, remove debris from the lid, loading rim and visible surfaces. Clean the agitator body or impeller plate without undoing any fastenings. A dispenser lid may be removable while the lower assembly remains fixed.

The agitator and impeller guide helps you distinguish a part that can be removed by the user from a technical disassembly. If the model has a lint filter, clean it separately and put it back in place before using the machine.

If it has a horizontal drum with flaps

Wait for the door to unlock and for it to reach the opening position specified by the machine. Check the flaps and accessible edges with a soft cloth. Do not force hinges, springs or catches, or turn the drum with the flaps improperly closed. If they do not close as indicated in the manual, stop using the machine.

Find the procedure for the dispensers and filters on that type of machine. Do not assume that a guide for a vertical tub describes how to access them.

Finish with the approved internal cleaning procedure

  1. Check that no objects remain and that the dispensers, filters and flaps are in place.
  2. Select the model’s maintenance cycle and use only the specified product.
  3. When it has finished, wait for the door to unlock and check the washing area: remove any accessible debris and run the subsequent rinse if indicated.
  4. Dry the rim and allow the lid to ventilate safely.

Do not add water manually to raise the temperature or water level of an automatic machine. If it does not have a heater, cleaning must be adapted to its programmes and water supply, not to a temperature taken from another machine.

Top access makes certain areas easier to see, but it does not make the agitator, impeller or pump parts for routine removal.

View all articles in How to clean your washing machine by type