Cleaning automatic dispensing reservoirs and circuits

Cleaning an automatic reservoir outside the washer and flushing its lines are different tasks. The manual should indicate which container can be removed, which areas can get wet, and whether there is a maintenance program.

Before emptying the system

Identify the system name, the compartments and the product in each one. Check whether cleaning is needed when changing formulas, after a period of inactivity or when a maintenance prompt appears. Don’t top up a reservoir with a mixture of products just to avoid emptying it.

For the product family described by Whirlpool for its Load & Go dispenser, cleaning is recommended when changing contents and before an extended period of inactivity. These conditions apply to that system; they don’t authorize adding water to any automatic reservoir.

Removable reservoir: follow the documented access steps

  1. Turn off dispensing and prepare the machine as directed in the manual before removing the container.
  2. Collect any remaining product and dispose of it according to the label. Don’t mix it with waste from other cleaners.
  3. Open only the covers and parts intended for the user. Keep water away from contacts, sensors and connectors.
  4. Clean and rinse only the permitted areas. If thickened detergent can’t be removed this way, don’t add solvents or use objects to puncture the lines.
  5. Leave the surfaces to dry as required, then reinstall the container. Make sure it is seated properly before refilling.

Internal tubes may require a different procedure

A clean reservoir doesn’t prove that its suction lines are clean. If a scheduled purge is available, use the approved method and container. With Miele TwinDos, circuit maintenance is performed using a dedicated function; a drum cycle is not a substitute.

When using the machine again, confirm that the contents match the compartment and check the automatic dispensing settings. If it doesn’t draw product, leaks product or the warning remains after maintenance is complete, consult the dispensing troubleshooting guide without opening pumps or internal connections.

Before an extended absence, decide whether to empty or maintain the circuit using the available manual; don’t wait for the detergent to dry.

View all articles in Which Washing Machine Components to Clean and How to Identify Them