Before leaving the washing machine unused, empty it, complete any outstanding cleaning and allow accessible areas to dry. Follow the model’s manual when shutting off the water, disconnecting the power and handling automatic dispensers.
Preparing the machine before an absence
Do not leave a damp load in the machine or products that have only been partly rinsed out. Complete any necessary cleaning in good time to allow the machine to dry, remove visible residue and check that any parts you have removed are put back in place. The storage area must meet the appliance’s environmental requirements.
Check automatic dispensing separately. For the range described by Whirlpool for Load & Go, the manufacturer recommends cleaning and emptying the dispensers before a prolonged period of inactivity. Other systems may need to be flushed differently; follow the instructions for automatic dispensers and circuits or TwinDos as applicable.
Follow the storage instructions to shut off the water supply and isolate the power. If a ventilation function is active, let it complete its operation as instructed in the manual before disconnecting the machine. Leave the door or lid ajar to allow drying, without creating a hazard or forcing the closure.
Checks when you return
- Look for dampness, fresh water marks, unusual smells or signs of pests around the appliance.
- Inspect any visible cables and hoses. Check that the connections have not been disturbed while you were away.
- Make sure the filters, caps and dispensers are still fitted, and that there are no textiles or objects inside.
- If there is no damage and the installation is correct, restore the water and power supply as instructed in the manual. Run the checks or cleaning cycle it recommends, and monitor the filling and draining.
If the appliance was wet due to flooding, has rodents inside or has electrical damage, have it assessed before connecting it. An empty cycle does not prove that it is safe to operate.
Storage and transport are different tasks
Leaving the machine where it is does not automatically mean you need to prepare it for a move. If you are going to move it, see transporting the washing machine. If the location could freeze, follow the frost-preparation instructions before storing it.
You should be able to stop the first check after your absence if you notice drips, new noises or a drainage fault; do not schedule it to run unattended.
View all articles in Preventive maintenance: tasks and frequency based on use
