E32 alternating with End may indicate that Siemens has limited the spin cycle because the laundry is unevenly distributed. The warning does not prove that the motor is faulty.
A warning at the end of the programme
The manufacturer’s documentation describes the spin cycle being interrupted when the system detects an imbalance. Check how the wash ended: laundry that is wetter than usual and a bundle of clothes provide a different context from a machine that never starts spinning.
Once the cycle has stopped and the door has unlocked, untangle the laundry. Distribute large and small items that are suitable for the same programme; a single absorbent item can be difficult to balance. Do not add laundry beyond the limit to compensate.
Deciding whether to run the spin cycle again
If the water has drained and you have redistributed the laundry, select a spin cycle suitable for the fabric, as specified in the manual for your E-Nr. Do not select a higher spin speed to overcome the imbalance.
If it happens again with different, suitable loads, note the programme, items and vibration. Check for knocking and movement if the appliance moves or knocks, and seek assistance if it happens again. Load size and distribution provides further guidance on preparing the load.
Interpret the final moisture level alongside the selected programme and how the laundry was distributed; do not treat it as proof of a fault on its own.
View all articles in Siemens washing machine error codes and warnings
